Publicidad
Idiomas disponibles
Idiomas disponibles
SETUP
NOTES
This DMX wireless system from Algam Lighting is not limited in number of groups and in number of fixtures
connected in a group.
BATTERY CHARGING
Fully charge the battery before first use and when the battery level indicator
charge the battery, plug in the charging cable and connect the device to the power adapter and a power outlet,
or use a USB power source.
During charging, the LED
LED COLOR
Red
Flashing Green
Flashing Blue
Blue
The discharge status is indicated as follows:
LED COLOR
Blue
Green
Red
Flashing Red
SPECIFICATIONS
Compact 2.4 GHz DMX Receiver with Battery
For wireless transmission of up to 512 DMX channels
3-pin Female XLR Connector
Plug & Play System: Easy and quick startup with a button for connection/disconnection
Transmission status LED
Transmission frequency: 2.4 GHz - ISM Band (license-free worldwide)
Power supply unit included: 100/240V~, 50/60Hz, 5V⎓
Data transfer: DMA - 32 Bit ARM
3.7V 450mAH Li-ion battery
Modulation: GFSK
DMX Channels: 512 channels per group
Range up to 600 m
Battery life: 20 hours
Dimensions: 85 x 18 x 18 mm
Weight: 110 g
indicates the battery level when the receiver is turned on:
3
BATTERY LEVEL
Less than 40%
Between 40% and 70%
Between 70% and 100%
100% - Full Charge
BATTERY LEVEL
Between 70% and 100%
Between 40% and 70%
Between 10% and 40%
Below 10%
light starts flashing red. To
3
When the receiver is turned off,
the LED lights up continuously in red
and turns off when it is fully charged.
If the capacity drops below 10%,
the LED flashes faster and faster until
the battery is depleted.
P.13
Publicidad
