Publicidad
Idiomas disponibles
Idiomas disponibles
Each channel has the option of 2 types of IIR and FIR filters (FIR filters can only be
manipulated from the graphical interface via PC (USB, RS232 or ETHERNET) IIR filters
(Bessel, Butterworth, Linkwitz) have an adjustment range of 20hz at 20khz, with an
attenuation slope of 18dB, 24dB, 36dB, 48dB per octave, except for the Linkwitz-Relay
filter which has values of 12dB, 24dB, 36dB, 48dB per octave
Turn the FREQ wheel to navigate between options and turn the GAIN/Q wheel to increase
or decrease them.
5. Setting the output compressor, turn the NEXT wheel and the interface will show the
following image:
Each output channel has an independent audio compressor, this compressor offers the
following functions, ON/OF to activate it, attenuation range from -6dB to +12dB, with step
values of 0.1dB, start time from 3ms to 100ms , release time: 2/4/6/8/16/32 times the start
time, compression ratio 1:1 to 128.
Press the BYPASS key (fig3) turn the FREQ wheel to navigate between the options, turn
the GAIN/Q wheel(s) to increase or decrease them.
6. Parametric output equalizer, press NEXT and the interface will show the following
image
Each output channel consists of a parametric equalizer with 8 points per channel,
indicated by EQ1, EQ2 and so on. Within each equalization point you can adjust the
frequency with values from 20Hz to 20Khz, the gain indicated in dB, with values from
-20dB to +12dB, the value of Q, with values from 0.404 to 28.9
Turn the FREQ wheel to navigate between options and turn the GAIN/Q wheel to increase
or decrease them.
System menu:
Press the SYSTEM key (fig3) to access the system menu, by pressing between the NEXT
and BACK keys we can navigate between the different options. Pressing ENTER we will
select the menu to configure (fig3).
1. Load Pro, storage and copying of profiles, in this section you can copy configurations
between channels and store configuration profiles already made
When you press ENTER the interface will show this image
Press ENTER again and with the FREQ wheel (fig4) toggle between: Load or copy
channels.
www.audibax.com
ADP 24 DSP / ADP 36 DSP / ADP 48 DSP
Out1 Comp OF
100ms
Atk 2
Out1 EQ1
+10.0dB
0.752
SYSTEM SETUP MENU
1. Load
Pro
+12.0dB
1: 1
14991Hz
HShf
9
Publicidad
