Publicidad
Idiomas disponibles
Idiomas disponibles
The unit has a set of keys to navigate and vary functions within its setting, (fig3) press
BACK to return to the previous menu, press NEXT to advance to the next menu, press
ENTER to select a menu, turn the Freq wheel ( fig4) to toggle through the menu options,
Rotate the Gain/Q wheel(s) (fig5) to vary the values (both wheels have the same function)
Press ESC to exit to the main menu
Press SYSTEM to enter the unit configuration menu.
1. Channel Input Gain Adjustment:
Press the A button on the front panel (fig7) for two seconds, the information that appears
on the screen will be shown, turn the FREQ wheel (Fig4) to select between Gain or Noise
Gate, Turn the GAINQ Wheel (Fig5) to vary The values, the GAIN values range from -36dB
to +12dB, by default its value is 0.0dB, the Noise Gate values range from -120dB to -20dB,
by default its value is -80dB.
2. Press NEXT to enter polarity setting. The interface is shown as follows:
Press the NEXT key to enter the Polarity adjustment. The unit offers the possibility of
varying it 180º (invert it) Turn the FREQ wheel to alternate between "NORMAL or INVERT"
3. Press NEXT to enter delay setting, the unit will display the following information:
Each channel has an independent delay control, by default the unit is set to Meters
Seconds ms, with a range of 0 to 1000ms. Turn the FREQ wheel to increase or decrease
the range (as shown in the image above) in
The interface. Rotate the Gain/Q value to adjust each parameter.
4. Press NEXT to enter parametric equalization mode:
The system consists of a parametric equalizer with 8 points per channel, indicated by EQ1,
EQ2 and successive ones, within each equalization point you can adjust the frequency
with values from 20Hz to 20Khz, the gain indicated in dB, with values of - 20dB to +12dB,
the value of Q, with values from 0.404 to 28.9.
To navigate through the options in this menu Turn the FREQ wheel and change values
with the GAIN or Q wheels.
www.audibax.com
ADP 24 DSP / ADP 36 DSP / ADP 48 DSP
InA
Gain: 0.0dB
Noise Gate: - 80dB
InA
Polarity
Pol=Invert
InA
x10.0 Dly=178.992ms
InA EQ1
+10.0dB
0.752
7
Delay
14991Hz
HShf
Publicidad
