KIKKA BOO i-BRONN Instrucciones De Uso página 11

IMPORTANT! KEEP FOR FUTURE REFERENCE!
EN
READ CAREFULLY!
II. SETTING THE SHOULDER BELT HEIGHT
2.1 Check whether the shoulder belts are set at the right height for your child. The shoulder belts should be inserted into the belt slots that lie at shoulder height or just above.
2.2
Step1. Loosen the harness .Press the adjust button to release the harness with one hand, use the other hand to pull out the shoulder straps outward.
Step2. Pull the headrest switch on upward and downward to adjust the height of the harness and the headrest according to the child's height.
III. USING THE BUCKLE
Locking Method: Align the left and right buckle tongues and insert into the buckle until you hear a ''click".
Unlocking method: You can press the red button of the buckle downwards and the two metal sections will pop up.
IV. ADJUSTING THE HARNESS
4.1 Loosening the shoulder harness: Press the adjustment button under the cover and at the same time pull both shoulder straps forward.
4.2 Tightening the harness: Pull the adjustment strap until the harness is fully tightened.
V. HOW TO USE THE ISOFIX CONNECTOR
In order to lock the ISOFIX connector to the anchorage points successfully, you can use ISOFIX insertion guides:
1) Locate the ISOFIX anchorage points and place the ISOFIX insertion guides over the two points.
2) Extend the ISOFIX brackets and connect them to the anchorage points of the vehicle.
VI. FORWARD FACING INSTALLATION (76-105 CM)
6.1 Press the ISOFIX unlock button and push out the ISOFIX connector. Find the vehicle ISOFIX anchor, make sure the ISOFIX connector is attached to the anchor correctly, meanwhile
push the seat until you hear a "click".
Notice: Check the ISOFIX unlock button if it shows green, make sure that it is installed firmly. (Green means locked correctly, red means unlocked or not locked).
6.2 Push the child's backrest until attached to the vehicle backrest tightly. Adjust the length of the top tether to the most suitable position. Connect the top tether with the fixing point
of the car.
6.3 String the belt of the top tether until the pulling regulator shows green. Release the buckle. Put the child into the safety car seat, align the left and right buckle tongues and insert
into the buckle until you hear a "click".
VII. FORWARD FACING INSTALLATION (100-150 CM, 3-12 YEARS OLD)
7.1 Put away the comfortable cushion and 5-point harness.
Notice: When used with height 100-150 cm, this seat can be installed by ISOFIX +adult safety belt or only by adult safety belt.
7.2 Removing 5-point harness and storage the accessory pad
A: Open the flat on the back of the seat and stow the shoulder sections of the harness behind.
B: To store the 5-point safety harness away it needs to be fully loosened first. Press the red release button and undo the harness. Lift the cover under the cushion and store the buckle
parts in the compatment.
7.3 Method 1: Installation with the adult safety belt (100-150 cm)
Put away the ISOFIX in the booster. Put the seat against the car seat.
7.4 Securing the child (Method 1)
Put the child into the child car seat and follow the routine. Use the headrest adjustable switch to adjust the height of the headrest according to the child's height. The shoulder straps
should be leveled with or just above the child's shoulders. Fasten the car seat belt and make sure it is tight enough.
7.5 Method 2: ISOFIX attachments+adult safety belt (100-150 cm)
Locate the ISOFIX anchorage points and place the ISOFIX insertion guides over the two points. Extend the ISOFIX brackets and connect them to the anchorage points of the vehicle.
7.6 Securing the child (Method 2)
Put the child into the child car seat and follow the routine. Use the headrest adjustable switch to adjust the height of the headrest according to the child's height. The shoulder straps
should be leveled with or just above the child's shoulders. Fasten the car seat belt and make sure it is tight enough.
VIII. UNLOCKING THE ISOFIX
8.1 Press the ISOFIX unlock button to release the ISOFIX connector and take away the seat.
8.2. Removing the cover
Adjust the headrest up to the heighest position, take away the comfortable cushion. Then release the buckle to remove the chest pad. Remove the headrest cover and seat cover
carefully.
IX. CARE AND MAINTENANCE
•
Wash the covers and shoulder pads with clean water under 30 degrees.
•
Clean the plastic parts and the buckle using a damp cloth.
•
Remove the harness system before washing with soap water.
Produced for Kikka Group Ltd., Vasil Levski 121, Plovdiv, Bulgaria. Made in China.
Complies with EN R129.
ENGLISH