The vibration damping system decreases vibration in
the handles to a minimum which makes the operation
easier. The vibration damping system decreases the
vibrations between the engine unit and the shaft unit.
1. Stop the engine.
2. Do a visual check for deformation and damage, for
example cracks.
3. Make sure that the vibration damping units are
attached correctly.
To do a check of the muffler
The muffler keeps noise levels to a minimum and sends
exhaust fumes away from the operator.
•
Do a visual check for damage and deformation.
1812 - 002 - 27.04.2022
•
Make sure that the muffler is correctly attached to
the product.
•
If the muffler on your product has a spark arrester
screen, do a visual check. Replace the spark
arrester screen if it is damaged.
a) Clean the spark arrester screen if it is blocked. A
blocked spark arrester screen causes the engine
to become too hot which causes damage to the
engine.
b) Make sure that the spark arrestor mesh is
attached correctly.
Fuel Safety
WARNING:
instructions that follow before you use the
product.
•
Never start the product if you spill fuel on it. Wipe the
spillage of and allow remaining fuel to evaporate.
•
Never start the product if you spill fuel on yourself
or your clothes. Change your clothes and wash any
part of your body that has come in contact with fuel.
Use soap and water.
•
Never start the product if the product is leaking fuel.
Check regularly for leaks from the fuel cap and fuel
lines.
•
Always put the product on a flat surface and make
sure the cutting attachment cannot come in contact
with any object while you add fuel.
•
Take care when handling fuel. Bear in mind the risk
off fire, explosion and inhaling fumes.
•
Observe caution when handling fuel and make sure
there is adequate ventilation. Fuel and fuel fumes
are highly inflammable and can cause serious injury
when inhaled or allowed to come in contact with the
skin.
•
Mix and pour fuel outdoors, where there are no
sparks or flames.
•
Do not smoke or place hot objects near fuel.
Read the warning
9