Descargar Imprimir esta página

Tognana IRIDEA D2DTU04IRZU Manual De Usuario página 20

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
If food gets stuck around the blades during use:
1. Release the speed button and wait for the blades to come to a complete stop.
2. Remove the processing lid.
3. Use a spatula to carefully remove the food. Do not use fingers as the blades are sharp!
4. After the food has been removed and the blades cleaned, reassemble the lid and continue
processing.
FOOD
Vegetables (cut into 2 cm pieces)
Meat (cut into 2 cm pieces)
Aged cheese such as Parmesan, Grana,
Pecorino (cut into 1 cm pieces)
❖ Processing settings are indicative and may vary depending on the quality of the food and desired
results.
Useful notes and tips:
Most processing requires less than 6 seconds, so be cautious during processing to avoid
undesired results.
Do not use the appliance for more than 1 minute continuously. After 1 minute of continuous
use, the unit may overheat. Let it rest for at least 5 minutes before resuming use.
the appliance must rest for 15 minutes to allow the main motor to cool down.
Do not shake or move the appliance during operation.
Start processing with pulsing movements by pressing and releasing the speed button quickly
until reaching the desired consistency.
Do not use to chop very hard dry foods like meat with bones, soybeans, peppercorns, coffee
beans, ice cubes, and frozen foods. 
Avoid overloading the appliance's motor; it's better to add ingredients
Do not process hot ingredients. Let hot ingredients cool to room temperature before placing
them in the container.
It's recommended to cut ingredients into 2 cm pieces before placing them in the
To avoid damaging the blades, the first 3 seconds of the "Chop" button will operate at
maximum speed before reducing.
CLEANING AND MAINTENANCE
Before cleaning, always disconnect the appliance from the power outlet and let it cool down completely.
CLEANING
1. MOTOR UNIT
Clean the motor unit with a soft cloth or a lightly damp sponge and dry with a cloth.
DANGER! DO NOT PUT IN THE DISHWASHER OR SOAK IN
LIQUIDS.
2. CONTAINER, BLADE ASSEMBLY, LID
These parts are dishwasher safe at a temperature not exceeding 55°C, or can be washed with hot water
and dish soap. It is recommended to wash by hand to keep the characteristics of the materials
unchanged.
Quantity
Processing time
≤200g
6 seconds
≤200g
10 seconds
≤200g
6 seconds
Speed
I
II
II
After 3 cycles,
gradually.
container.
20

Publicidad

loading

Este manual también es adecuado para:

Iridea d2dtu04irch