Publicidad
Idiomas disponibles
Idiomas disponibles
Add the steam wash function during washing.
1. This function is used to reduce the washing time of the program, and quicken the washing
process. After pressing this button, the program time will be reduced. After pressing this button
again, the program time will be increased to the initial state;
2. This function can be set only before the start of the appropriate program, and cannot be
selected after the program runs;
3. For programs with the auto weighing function, auto weighing will be canceled after selecting
this function and restored after deselecting this function.
The UV function can be selected when the machine is in standby. The UV lamp stays on
throughout the running process except in Reserve, Anti crease, Pause and Alarm states when the
UV lamp is off.
1. When this function is selected, the machine will enter Anti crease mode upon completion of the
spin program to prevent crease of clothes caused by a long-time stay in the drum;
2. Anti crease cannot be set when Spin is set to "No Spin" or when Drum Clean is selected;
3. User can turn the knob, tap the Start/Pause button, or short press the Power button to end the
Anti crease mode and enter the End interface. If no operation is performed, the program will end
automatically after the default maximum duration of 12 h.
This function can be used to increase the intensive wash time and enhance the wash intensity.
Thi
s function can be used to lower the spin speed, wash the clothes gently, and reduce the noise.
1. This function is for washing clothes with special stains. Different stain types can be selected
after entering this interface. After selecting a stain type, tap the "OK" button for confirmation, or
tap the "CANCEL" button to abandon the selection.
2. If the program is changed, the previously selected stain type will be canceled automatically.
35
Publicidad
