Publicidad
Idiomas disponibles
Idiomas disponibles
This function can realize intelligent interconnection between the washing machine and the dryer.
Prior to use, both the washing machine and the dryer should be connected to the same WLAN as
the app.
1. In the Program Select main interface, Settings interface, or System Settings interface, you can
touch the Washer-Dryer Link icon to enter the Wash＆Dry setting interface;
2. If the dryer has not been paired, touch this icon to enter device scanning, and select
"Automatically scan the dryer" as prompted on the screen;
3. If the dryer has been paired with, touch this icon to enter the Machine List, and select the dryer
to be paired with;
4. After successful pairing, the Wash＆Dry function will be enabled; the dryer will automatically match
the corresponding program and starts preheating to raise the temperature in the drum
15min before the end of laundry in the washing machine. When spinning is finished in the washing
machine, directly transfer the spun clothes to the dryer drum. Touch the Start/Pause button to start
drying in the dryer, which is time-saving and efficient.
5. Within 20min before the end of the program on the washing machine, please keep the dryer in
power-on, network-connected and door-closed state to ensure normal linkage;
6. Preheating will be canceled if you open the door, short press the Power button, press the Start/
Pause button or turn the knob when the dryer is preheating.
7. After the Wash＆Dry Link function is enabled, the dryer can also change the drying program and
function as per need.
8. The Wash＆Dry Link function applies to partial programs.
38
Publicidad
