Garland MULE 561 E-V20 Manual De Instrucciones página 23

The substitution of the plug or cable should be
done by an approved and homologated after sales
service. We recommend that this machine should be
connected to residual differential whose current is
lower or equal to 30mA.
Never use a damaged cable or a damaged electric
mains, or that does not comply with current
normative or those required for this machine. When
using a electric extension for the cable, make sure
that it has a minimum section of 1.5 mm
should not be longer than 25metres in length and
homologated for outdoor use. Both the plug and the
base of the electric extension must be waterproof
and should never be submerged in water. The use of
an adequate electric extension will reduce the risk of
electric shock.
Place the electric extension so that it does not hook
itself on branches, it is well clear of the blades of the
tiller and other obstacles and ensuring that it is not in
the working area. The cable extension should always
be behind the user.
Always hook the cable to the hook provided on the
machine.
Always disconnect the machine from the electric
mains before carrying out any maintenance work
on this machine. Only manipulate the machine when
disconnected from the mains.
2.5. USAGE AND CARE OF THE MACHINE
Use this machine only for weeding and to oxygenise.
Do not use this tiller for any other purposes. The use
of this machine for other non contemplated uses can
cause dangerous situations.
Use this machine and its related accessories
according to the instruction manual and taking into
account specific working conditions. The use of
this machine for jobs not contemplated here can be
dangerous.
Check that all security measures are in place and
work properly.
The manufacturer will not be responsible for damages
caused due to an incorrect use of the machine.
Do not overstretch the machine. Use the machine
for its recommended use. The use of the machine for
and it
2
its correct job will guarantee a better job as well as a
safe use.
Do not use the machine if the switch does not
change from closed to open. Any electric machine
that cannot be controlled by the switch is dangerous
and must be repaired.
Before starting to work with the machine, check
that the blades are not in contact with any object
and that they can move freely.
Service the machine adequately. Check that the
moving parts are well aligned and not tangled, that
there are no broken parts or other conditions that
could affect the usage of the machine. Repair if
necessary prior to use. A lot of accidents are caused
due to poor maintenance of the machine.
Do not use the tiller in working areas that are steep
as you cannot guarantee your personal security.
When working in conditions with a little incline, work
more slowly and always ensure that you maintain a
good stability.
If the blades hit a strange element whilst in use,
stop the machine, disconnect the machine from the
mains and examine the machine before restarting
work. If you detect any strange sign, take your
machine to your nearest after sales service.
23/112
English