MPM MOD-70 Manual De Instrucciones página 34

EN
USING THE VACUUM CLEANER
1. Make sure the vacuum cleaner is properly assembled and the battery is charged.
2. Connect the relevant appliance:
- multi-purpose electric brush with illumination (4) - for all types of hard surfaces and carpets,
LEDs illuminate the surface to be cleaned for perfect vacuuming
- furniture/Venetian blind attachment (8) – dedicated to vacuuming roller blinds, lampshades,
mirrors and anywhere else where gentle vacuuming is a priority, the brush length can be adjusted
to suit the vacuuming conditions
- crevice attachment (6) – vacuuming of corners, spaces under the furniture and anywhere where
access to free use of other accessories is limited.
Depending on the needs, connect the equipment to the suction pipe (3) or motor unit (2).
1. Start the vacuum cleaner with a switch (fig. 2). The vacuum cleaner will operate in the AUTO mode.
2. In order to switch to one of the operating modes (AUTO, MAX or ECO), touch the "papillary line"
icon.
3. After the vacuuming is finished, switch off the vacuum cleaner with a switch (fig. 5).
Fig. 5
motor speed
battery charge
operating mode
The vacuum cleaner is provided with a flexible aluminium pipe in order to get to hard-to-
reach areas.
1. Place the vacuum cleaner on the floor, holding the motor module handle (fig. 6) with one hand.
2. Press the key located in the rear part of the aluminium pipe with your other hand. The pipe will
bend automatically which will facilitate the vacuuming of hard-to-reach places, e.g. floor under
the couch.
3. In order to fold back the pipe, raise the vacuum cleaner. The aluminium pipe will lock itself auto-
matically in the straight position.
34
touch the icon to
2
change the operating
mode
dusting indicator
roller lock indicator
vacuum cleaner on/
1
off switch
AUTO
ECO
MAX