The Meter Functions Vs Displays - ADInstruments AD71B Manual De Usuario

_____________________________________________________________________
Press to enter relative mode, the
primary display shows
The left secondary display shows the
present measurement value. The
right secondary display shows the
stored value. The primary display
shows the present measurement value
minus the stored value.
Press EXIT to exit relative mode.
In Setup, each press to increment an
In Recall, each press to recall the next
In Store, each press to increase a
second on the storing interval.
When it is at AC measurement mode,
press the button to display AC+DC True
Yellow
RMS value in the primary display and
Button
the left secondary display "AC+DC".
Use the blue button to select any rotary
switch alternate function (labeled in
Press and hold the Button while turning
on the Meter to toggle to 2000 counts
Blue
Button
It is faster when the Meter is at 4000
counts measurement mode.
After the Meter is resuming from
Automatic Power Off or turn on and off
again, the Meter will back to normal
measurement mode (20000 counts).

The Meter Functions Vs Displays

Table 2-3 shows the cross reference of function and display:
©Copyright Abacanto Digital SA.
Option.
stored reading.
blue letters).
for all functions.
Table 2-3 Functions Vs Displays
Manual de usuario AD71B
Press the button
. once.
Press and hold
the button for
over 1 second.
Press the button
once
Press the button
once
AD Instruments
48