Descargar Imprimir esta página

AmazonBasics B09YD91GRR Manual De Instrucciones página 6

Plancha a gas de encimera portátil con un quemador

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
5 . Connecting/Disconnecting a Gas Cylinder
5 .1 Connecting an LP gas cylinder
1. Push in the control knob and turn it clockwise to OFF
position (Fig. 1). Release the control knob.
1
Control knob
2. Take the protective cap off the cylinder valve outlet of the
gas regulator (Fig. 2).
3. Push an LP gas cylinder into the cylinder valve outlet and
turn clockwise by hand to secure it in place. Do not over-
tighten (Fig. 2).
2
Protective cap
6
2
1
1
2
5 .2 Disconnecting an LP gas cylinder
W ARNING
Risk of fire or explosion!
» Disconnect the LP gas cylinder when the appliance is not
in use.
» Do not transport or store the appliance with the LP
gas cylinder connected. Before transport or storage,
disconnect the LP gas cylinder and store it outdoors.
» Always cover the cylinder valve outlet of the gas regulator
with the protective cap when an LP gas cylinder is not in
use.
» Do not disconnect the LP gas cylinder while the appliance
is in use or is still hot.
1. Push in the control knob and turn it clockwise to OFF
position (Fig. 1). Release the control knob.
2. Turn the LP gas cylinder counter-clockwise by hand to
disconnect from the cylinder valve outlet of the gas
regulator (Fig. 3).
3. Refit the protective caps on the cylinder valve outlet (Fig. 3)
and on the LP gas cylinder.
3
6 . Gas Leak Test
CARBON MONOXIDE HAZARD
This appliance can produce carbon monoxide
which has no odor. Using it in an enclosed
space can kill you. Never use this appliance in
an enclosed space such as a camper, tent, car or
home.
D ANGER
Risk of explosion!
» Perform a gas leak test on the connection between the
gas regulator and the LP gas cylinder when lighting the
appliance for the first time, when the LP gas cylinder has
been refilled/changed, after a travel over rough or bumpy
roads or after a prolonged period of storage or non-use.
» Do not smoke or use any type of flammable material in
the area during this gas leak test.
» Do not use an open flame to check for leaks. Always use a
soapy water solution.
1
Protective cap
2

Publicidad

loading