Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
•
If your gas cylinder doesn't respect the required dimensions, put it on the floor, next to
your appliance.
•
Use only LPG cylinder.
•
Do not obstruct the ventilation openings of the housing of the gas cylinder.
•
Do not use a damaged or rusted gas cylinder. In case of damaged, please contact your
gas cylinder supplier to make it checked. Do not use a gas cylinder with a damaged valve.
Use a regulator with safety valve, in compliance with current national regulations (NF for
•
France, BSEN 16129:2013 for other countries) of 37 mbar for Propane or 28-30 mbar
for Butane.
Note : For other countries, cylinder and regulator are dependant on the National
Situations in countries of destination.
NEVER USE YOUR PRODUCT WITH CITY GAZ. The gas circuit is produced only for Butane/
•
Propane (G30/G31).
NEVER USE TOOL TO TIGHTEN THE PRESSURE REGULATOR NUT ON YOUR PRODUCT:
•
it can damage the product. A hand tight is sufficient.
Coupling head
France: Use the G1/2 threaded gas inlet coupling head on the side or rear of your barbecue.
•
Other countries: Use the ringed nozzle supplied as a spare part. Using an appropriate
•
tightening tool (spanner), screw the ringed nozzle firmly onto the G1/2 threaded gas inlet
G1/2 coupling head and then make a leakage test (see Leak test).
7
EN
Publicidad
