Care and Cleaning
To keep nugget ice tasting fresh and ice maker performing
Descaling is recommended for removing hard mineral
depending on water hardness.
Sanitizing
water, cleaning schedule may need to be adjusted based
on hardness of water.
switching to distilled water is suggested. To clean the
soft cloth dampened with soapy water to gently clean the
clean the reservoir. Use a soft cloth moistened with water.
System Descaling / Sanitizing Procedure
4. Descaling:
instructions provided.
Sanitizing:
5. Pour solution into water reservoir, up to the fill line
figure 4. After three minutes the water will stop and
NOTE:
8. Descaling: run the clean cycle up to 3 times and
then let the unit sit for 18 hours and soak. While the
unit is soaking, dip a cloth in the solution and wipe
the inner walls. Use a cotton swab to clean any
cracks. When you are done, rinse the cloth with clean
deposits.
Sanitizing: once the Cleaning indicator turns off,
49-9000222 Rev. 3
WARNING
cleaning with bleach, use bleach in a well ventilated area
WARNING
Unplug the product before cleaning by
hand, and when not in use.
Water
Clean
Hold 3 Sec
Light
Power
7