Maytag MHN30PD Instrucciones De Instalación página 13

CODE
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses the 24 hr. clock
7. 00 This is the start hour; 0-23 hours. Select START
HOUR by pressing the PERM. PRESS button.
g Press the DELICATES AND KNITS button once
to advance to next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses the 24 hr. clock
8. 00 This is the stop hour; 0-23 hours. Select STOP
HOUR by pressing the PERM. PRESS button.
g Press the DELICATES AND KNITS button once
to advance to next code.
9. 10 SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by '0' indicates no selection that
particular day (9.10). A number followed by an 'S'
indicates selected for that day (9.1S). To change
the value of '0' and 'S', use the QUICK CYCLE
button.
Days of the week (1-7) are selected by pressing
the PERM. PRESS button.
When exiting set-up code '9', the display must
show current day of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
Press the DELICATES AND KNITS button once
g
to advance to next code.
VAULT VIEWING OPTION
A. 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
A. 00 Not Selected 'OFF'.
A. SC Selected 'ON'. Press the QUICK CYCLE button
once for this selection. When selected, the money
and/or cycle counts will be viewable (if counting is
selected) when the coin box is removed.
Press the DELICATES AND KNITS button once
g
to advance to next code.
VALUE OF COIN 1
b. 05
b. 05 This represents the value of coin 1 in the quantity
of 5% increments of the larger coin value. 5 x
5%=25%.
By pressing the PERM. PRESS button, there
is the option of 1-199 for the quantity of 5%
increments.
With coin slide activation, this represents the total
vend price.
NOTE: For coin slide activation, replacement of
the meter case is necessary.
g Press the DELICATES AND KNITS button once
to advance to next code.
EXPLANATION
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
CODE
C. 20 VALUE OF COIN 2
C. 20 This represents the value of coin 2 in the quantity
of 5% increments of the larger coin value. 20 x
5%=100%.
By pressing the PERM. PRESS button, there
is the option of 1-199 for the quantity of 5%
increments.
C. 05 PN MODELS: This represents the value of coin
2 in the quantity of 5% increments of the larger
coin value. Factory default = 5 x 5% of the larger
coin value.
g Press the DELICATES AND KNITS button once
to advance to next code.
d. 00 COIN SLIDE OPTION
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
d. 00 Not Selected 'OFF'. Used with coin drop or card
readers.
d. CS Selected 'ON'. Press the QUICK CYCLE button
3 consecutive times for this selection.
NOTE: This option needs to be set to "00" unless
the meter case has been changed to accept a
coin slide device.
When coin slide mode is selected 'On', set b.
equal to value of vend price. Set set-up code
6 (regular cycle price) and set-up code 3 (special
cycle price) to number of slide pushes. If washer
is set up as "CS" and a coin drop is installed, it
will not register coins.
NOTE: For coin slide activation, replacement of
the meter case is necessary.
Press the DELICATES AND KNITS button once
g
to advance to next code.
ADD COINS OPTION
E. 00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. This option causes the
customer display to show the number of coins
(coin 1) to enter, rather than the amount.
E. 00 Not Selected 'OFF'.
E. AC Selected 'ON'. Press the QUICK CYCLE button
3 consecutive times for this selection.
Press the DELICATES AND KNITS button once
g
to advance to next code.
ENHANCED PRICING OPTION
F. 00
F. 00 Not Selected 'OFF'.
F. CP Cycle-Based pricing enabled. This option allows
configuration of different prices for cold, warm,
and hot water cycles.
F. Su Super Cycle pricing enabled. This option allows
customers to upgrade cycles by depositing
extra money. Set-up codes "H." and "h." will be
displayed only when this option is enabled. Press
the QUICK CYCLE button once for this selection.
g Press the DELICATES AND KNITS button once
to advance to next code.
EXPLANATION
13