Multi-Use Slicer - SEVERIN AS 9621 Instrucciones De Uso

Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Familiarisation
1. Rating label (on underside of the unit)
2. Slice thickness selection knob
3. Stop plate
4. Push switch
5. Sliding tray (foldable)
6. End piece holder with protective shield
7. Collection tray
8. Base plate
9. Stainless steel blade
10. Blade cover
11. Collecting tray storage space
12. Power cord wind-up storage (on
underside of the unit)
Connection to the mains supply
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Important safety instructions
●
This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
●
Children should be supervised to ensure
that they do not play with the appliance.
●
Do not allow the slicer to come into
contact with open flames or any hot
surface such as hotplates.
●
Do not operate the slicer if
- the unit or its power cord show any
signs of damage,
- the blade cover, sliding tray, stop plate
and base plate have not been correctly

Multi-use slicer

fitted.
●
For safety reasons, always bring the stop
plate back to its rest (zero) position after
use, so that it is flush with the blade.
●
The end piece holder should not be
detached, unless the size or shape of the
food to be sliced makes it unavoidable.
●
Always remove the plug from the wall
socket
- after use,
- in case of any malfunction,
- during cleaning of the appliance.
●
Do not allow the power cord to come
into contact with the blade. When
removing the plug from the wall socket,
never pull on the power cord.
●
The slicer is intended for domestic use
only and not for commercial applications.
●
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
●
In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The address can be found in the
appendix to this manual.
Operation
Uses
The slicer is designed for slicing bread, cold
cuts, ham, cheese, cold roasts and other
foodstuffs suitable for slicing.
Short-term operation
The appliance has been designed for short-
term operation only, i.e., the slicer should
not be operated continuously for more than
10 minutes. Switch off the appliance
afterwards and allow the motor to cool
down before switching it on again.
Positioning the slicer
The slicer must be positioned on a smooth
7