Wiring Diagram; Getting Started - Hama BA-5120 Instrucciones De Uso

4. Wiring diagram

5. Getting Started

5.1 Speaker
• Connect the four satellite speakers as well as the
centre speaker with the corresponding audio outputs
at the rear of the subwoofer, as shown in item 4 of
the wiring diagram.
• Then connect the corresponding AUX audio input
with the signal source (computer/DVD/Blueray/MP3
player etc.), with the help of one of the enclosed
audio cables.
• Connect the subwoofer's power supply cable to an
undamaged electrical socket which has been installed
correctly.
Note
• Only connect the product to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
• When using a mult-socket power strip, make sure
that the sum power draw of all the connected
devices does not exceed its maximum throughput
rating.
• If you will not be using the product for a long
period of time, disconnect it from mains power.
5.2 On/off switch / standby
• Turn the speaker system on by turning the on/off
switch ON/OFF at the rear of the subwoofer to ON.
• Turn the speaker system off completely by turning
the on/off switch ON/OFF on the rear side of the
subwoofer to OFF.
Note – Automatic standby
• Please note that the speaker system switches to
standby mode after 15 minutes of no activity (no
audio playback / no other activity).
6. Advanced features
General and individual volume control
• Press VOL+ or VOL- to increase or decrease the
volume of all speakers together.
7 . Care and Maintenance
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
7