Operation - Cameo ROTOFEVER Manual De Usuario

8
DMX LED
The LED lights up as soon as the DMX control mode is enabled.
9
SOUND LED
The LED lights up as soon as the sound control mode is enabled.
10
AUTO LED
The LED lights up as soon as the automatic control mode is enabled.
11
SLAVE LED
The LED lights up as soon as the slave mode is enabled.
12
OPERATING KEYS
MODE: Press to move up one level in the menu structure.
ENTER: Confirm programme selection and value changes.
UP and DOWN: Select a menu option or programme, and change settings such as programme speed and DMX address.
13
MIC
Microphone for music control mode.
14
MIN–MAX
Dial for setting the microphone sensitivity in standalone sound control mode and in DMX mode. Turn anti-clockwise to reduce sensitivity and
clockwise to increase sensitivity.

OPERATION

A few seconds after connecting to the mains, the effects spotlight is ready for operation and the previously selected operating mode is
activated. During the start-up process, the software version is displayed briefly (V1x.xx).
CONFIGURE DMX START ADDRESS
Press MODE repeatedly until you reach the top menu level (Addr, chAn, ModE, SEt, inFo). Now use UP and DOWN to select the menu item
"Addr" and confirm by pressing ENTER (the display LED "DMX" will light up). Configure the desired DMX start address using UP and DOWN
and confirm by pressing ENTER (address with the highest value depends on the DMX mode selected). If there is no DMX signal, the display
characters will flash. Flashing stops as soon as a DMX signal is present.
ENTER
UP/DOWN
CONFIGURE DMX MODE
Press MODE repeatedly until you reach the top menu level (Addr, chAn, ModE, SEt, inFo). Now use UP and DOWN to select "chAn" (the
display LED "DMX" will light up), press ENTER and then use UP and DOWN again to select the desired DMX mode before confirming your
selection by pressing ENTER (03ch, 12ch, 23ch). In order to enable the DMX mode, use UP and DOWN to select the menu item "Addr" and
confirm by pressing ENTER.
ENTER
UP/DOWN
SOUND CONTROL MODE
Press MODE repeatedly until you reach the top menu level (Addr, chAn, ModE, SEt, inFo). Use UP and DOWN to select the menu item
"ModE", confirm by pressing ENTER and then use UP and DOWN again to select the submenu item "Sound" (the display LED "SOUND" will
light up). Press ENTER, use UP and DOWN to select one of the eight sound programmes SP01 to SP08 and then confirm by pressing ENTER.
Now choose the rotation direction using UP and DOWN again (rccw/r cw) and confirm by pressing ENTER. Use UP and DOWN once more
to set the rotation speed to between 00 and 99 (Speed Movement Sm00–Sm99) and confirm by pressing ENTER. You can now set the LED
brightness to between 00 and 99 (Dimmer di00–di99). Confirm by pressing ENTER. The selected sound programme will be shown in the
display.
ENTER
UP/DOWN
SLAVE MODE
Press MODE repeatedly until you reach the top menu level (Addr, chAn, ModE, SEt, inFo). Now use UP and DOWN to select the menu item
6
ENTER
PROGRAM
ENTER ENTER
UP/DOWN UP/DOWN
ENTER
ROTATION SPEED
ENTER
UP/DOWN
DIMMER
ENTER
ENTER
UP/DOWN