Device Settings - Cameo ROTOFEVER Manual De Usuario

"ModE", confirm by pressing ENTER, then use UP and DOWN again to select the submenu item "SLAV" (the display LED "SLAVE" will light
up) and confirm by pressing ENTER. Connect the slave and master unit (same model) with a DMX cable (master = DMX OUT, slave = DMX
IN) and enable one of the standalone modes on the master unit (automatic control, sound control or static programme). The slave unit
will now follow the master unit. If there is no control signal, the display characters will flash. Flashing stops as soon as a control signal is
present.
ENTER
UP/DOWN
AUTOMATIC CONTROL MODE
Press MODE repeatedly until you reach the top menu level (Addr, chAn, ModE, SEt, inFo). Now use UP and DOWN to select the menu item
"ModE", confirm by pressing ENTER and then use UP and DOWN again to select the submenu item "Auto" (the display LED "AUTO" will
light up). Press ENTER, select one of the eight auto programmes Au01 to Au08 using UP and DOWN and confirm by pressing ENTER; set the
programme speed to between SP00 and SP99 using UP and DOWN and confirm by pressing ENTER. Now choose the rotation direction using
UP and DOWN again (rccw/r cw) and confirm by pressing ENTER. Use UP and DOWN once more to set the rotation speed to between 00 and
99 (Speed Movement Sm00–Sm99) and confirm by pressing ENTER. You can now set the LED brightness to between 00 and 99 (Dimmer
di00–di99). Confirm by pressing ENTER. The selected auto programme will be shown in the display.
ENTER
UP/DOWN
STATIC MODE
Static mode enables functions such as rotation, brightness of R, G, B, W, A, UV etc. to be configured directly on the device, similarly to a DMX
control unit. This means that an individual scene can be created without the need for an additional DMX controller.
Press MODE repeatedly until you reach the top menu level (Addr, chAn, ModE, SEt, inFo). Now use UP and DOWN to select the menu item
"ModE", confirm by pressing ENTER, then use UP and DOWN again to select the submenu item "StAt" and confirm by pressing ENTER. Use
UP and DOWN to set the brightness of the red LEDs to between 00 and 99 and confirm by pressing ENTER. Set the brightness of the green,
blue, white, amber and UV LEDS in the same way. Now choose the rotation direction using UP and DOWN again (rccw/r cw) and confirm
by pressing ENTER. Use UP and DOWN to set the rotation speed to between 00 and 99 (Speed Movement Sm00–Sm99) and confirm by
pressing ENTER.
ENTER
UP/DOWN

DEVICE SETTINGS

Press MODE repeatedly until you reach the top menu level (Addr, chAn, ModE, SEt, inFo). Now use UP and DOWN to select the menu item
"SEt", confirm by pressing ENTER, then use UP and DOWN again to select the desired submenu item, confirm by pressing ENTER and enter
the setting as required (confirm by pressing ENTER).
ENTER
PROGRAM PROG. SPEED
ENTER ENTER
UP/DOWN UP/DOWN
RED
ENTER ENTER
UP/DOWN UP/DOWN
AMBER
ENTER
UP/DOWN
ROTATION
ENTER ENTER
UP/DOWN UP/DOWN
GREEN BLUE
ENTER ENTER
UP/DOWN UP/DOWN
UV ROTATION
ENTER ENTER
UP/DOWN UP/DOWN
ROT. SPEED DIMMER
ENTER
ENTER
UP/DOWN
WHITE
ENTER
UP/DOWN
ROT. SPEED
ENTER
7