Switching Modes - Runtal FOLIO GLASS Serie Instrucciones De Uso

RUNTAL FOLIO GLASS
Press then the "Mode" button - the "Hour" will be flashing – set
current hour by using the "Plus" or "Minus" buttons.
Then press the "Mode" button once again – the minutes section will
be flashing – set current minute by using the "Plus" or "Minus" but-
tons once again.
Press the "Mode" button again to terminate the Minutes setting and
to switch to stand-by mode.
While "Date" is flashing, if the user does not wish to set any para-
meter, just press the «Stand-by» button to switch to stand-by mode
immediately.
IR transmission
If no button is in operation, after 1 second, the remote control will
transmit the IR data to the device and the IR transmission symbol
will start flashing. At the end of data transmission the symbol will
disappear.
38

5.3 SWITCHING MODES

Once date/hour/minutes are set and once having switched to "stand-
by" mode, press the "Stand-by" button - the remote control will
switch to "Comfort" mode.
From the «Comfort» mode, by pressing the "Mode" button, the
"Night" mode will be activated.
Similarly, by pressing the "Mode" button again, the remote control's
modes will switch to: Comfort Mode – Night Mode – Antifreeze Mode
– Clock Mode – Pilot-Wire Mode – Comfort Mode***
Symbol
Comfort and Night Modes – setting of the mode's temperature
Go to "Night" or "Comfort" mode - use "Plus" or "Minus" buttons for
temperature setting: by pressing the "Plus" button once, the tempe-
rature will rise by 0.5 degrees, by pressing the "Minus" button once,
the temperature will drop by 0.5 degrees.
Temperature can be adjusted from 7 up to 32 degrees.
40016966 40016966
Mode Function description
The temperature of the appliance is controlled by
Comfort
the "Comfort mode" settings
The temperature of the appliance is controlled by
Night
the "Night mode" settings
The temperature of the appliance is controlled by
Antifreeze
the "Anti-freeze" settings
The temperature of the appliance is controlled by
Fil-pilot
the pilot-wire
The temperature of the appliance is controlled
Clock by the mode of either the "comfort" or "night"
programs
The appliance heats up the room at maximum
2 hr timer
power
Lock Locks the keypad of the appliance
Presets a room temperature of 17°C (saving of
Eco
more than 10% against a room temperature of
20°C on a yearly basis)
Window The appliance activates the "Window open"
open
function
Radar The appliance activates the "radar" function
Stand-by
The appliance is not in operation
ENGLISH
39