RUNTAL FOLIO GLASS
The "Night" mode temperature setting can not be higher than the
"Comfort" mode's one.
Example : If the "Comfort" mode's temperature has been set to 25
degrees, when switching to "Night" mode and wanting to set the
temperature, once it reaches 25 degrees, the temperature will not
rise, even when pressing the "Plus" button.
Antifreeze Mode
Go to "Antifreeze" mode, the temperature is fixed to 7 degrees, by
pressing the "Plus" or "Minus" buttons, the temperature cannot be
neither risen nor reduced.
Clock Mode
Go to "Clock" mode, the LCD display will be showing temperature,
date, time and state of the daily program.
Pilot-Wire Mode
Go to "Pilot-Wire" mode – the device will recognise the commands
received from the Pilot-Wire (Comfort / Nigh / Antifreeze / ECO /
Stand-by)
2-Hours Mode
In any mode, by pressing the "two hours" button, the device will start
to heat up the environment at full power for 2 hours.
By pressing the button again, the remote control will go back to the
previous mode.
40
Stand-by Mode
In any mode, by pressing the «Stand-by» button, the remote control
will go into stand-by mode and the device will stop operating.
By pressing this button again, the remote control will go back to the
previous mode.
Eco Mode
Eco mode can be activated to reduce power consumption when the
room is empty for a specific period of time.
By pressing the «Eco» button, the remote control display will show
the icon of the function.
By pressing the «Eco» button again, the function will be disabled and
the icon will disappear.
"Window open" Mode
Pressing the «Eco» and «-» buttons simultaneously for 3 seconds
will activate the 'window open' sensor.
Pressing the «Eco» and «-» buttons again simultaneously for
3 seconds will disable the function.
"Presence" Radar Mode
Pressing the «Eco» and «+» buttons simultaneously for 3 seconds
will activate the sensor of presence in the room.
Pressing the button «Eco» and «+» buttons again simultaneously for
3 seconds will disable the function.
40016966
40016966
ENGLISH
41