5. If the electricaloutlet for the ice makeris behindthe cabinet,plug in the ice maker.
6. Pushthe ice makerinto position.
7. Sealall aroundthe cabinetto the floor with anapprovedcaulkingcompound.
OPERATION
Final Check List before Operation
1. Have all packing materials and tape been removed from the interior and exterior of
the ice maker?
2. Did you clean the ice storage bin?
3. Have the installation
instructions
been followed, including
connecting
the machine to
water, drain and electricity?
4. Has the machine been leveled?
.
Is the ice maker in a site where the ambient temperature
is between
13° C (55 ° F) and
32°C (90°F) and the water temperature
within 5°C (41 ° F) and 25°C (77 ° F) all year
round?
6. Has the water supply pressure been checked to ensure a minimum
of 20 psig with a
static pressure not to exceed 80 psig?
7. Is there a clearance of at least 4 in. (101 ram) at the rear, and 0.6 in. (15 mm) at the
sides and top for proper air circulation?
8. Has the power supply voltage been checked or tested against the nameplate
rating?
And has proper grounding
been installed in the ice maker?
9. Is the ice maker
plugged
in?
10. Did you turn on the main water supply and the tap?
11. Did you check for leaks at all water supply and drainpipe
connections?
14