General Power Tool Safety Warnings - Makita DGA405 Manual De Instrucciones

ENGLISH (Original instructions)
1. Button
2. Red indicator
3. Battery cartridge
4. Lock-off lever
5. Switch lever
6. Indicator lamps
7. Check button
8. Battery indicator
9. Mode indicator
10. Shaft lock
11. Wheel guard
12. Bearing box
13. Screw
14. Lever
15. Lock nut
SPECIFICATIONS
Max. wheel thickness
Rated speed (n)/No load speed (n
Overall length
With battery cartridge BL1830, BL1830B,
BL1840, BL1840B, BL1850, BL1850B, BL1860B
Net weight
With battery cartridge BL1830, BL1830B,
BL1840, BL1840B, BL1850, BL1850B, BL1860B
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
6
Explanation of general view
16. Depressed center wheel
17. Inner flange
18. Lock nut wrench
19. Ezynut
20. Abrasive wheel
21. Spindle
22. Arrow
23. Notch
24. Flex wheel
25. Back up pad
26. Sanding lock nut
27. Abrasive disc
28. Rubber pad
29. Abrasive cut-off wheel/diamond
wheel
Model
Wheel diameter
Spindle thread
With battery cartridge
BL1815N, BL1820, BL1820B
With battery cartridge
BL1815N, BL1820, BL1820B
Rated voltage
GEA010-1
DGA405
100 mm (4")
6.4 mm (1/4")
)
0
2.2 kg
2.4 kg
CORDLESS GRINDER SAFETY
ENE048-1
WARNINGS
Safety Warnings Common for Grinding, Sanding,
Wire Brushing, or Abrasive Cutting-Off Operations:
1. This power tool is intended to function as a
grinder, sander, wire brush or cut-off tool. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
2. Operations such as polishing are not
recommended to be performed with this power
tool. Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
3. Do not use accessories which are not specifically
designed and recommended by the tool
manufacturer. Just because the accessory can be
attached to your power tool, it does not assure safe
operation.
30. Wheel guard for abrasive cut-off
wheel/diamond wheel
31. Abrasive cut-off wheel
(Thinner than 4 mm (5/32"))
32. Abrasive cut-off wheel
(4 mm (5/32") or thicker)
33. Diamond wheel
(Thinner than 4 mm (5/32"))
34. Diamond wheel
(4 mm (5/32") or thicker)
35. Wire cup brush
36. Wire wheel brush
37. Exhaust vent
38. Inhalation vent
39. Dust cover
DGA455
115 mm (4-1/2")
6.4 mm (1/4")
M10 M14 or 5/8" (country specific)
8,500 min
348 mm
362 mm
2.3 kg
2.5 kg
D.C. 18 V
DGA505
125 mm (5")
6.4 mm (1/4")
-1
2.3 kg
2.6 kg
GEB059-4