Technical Data; Cordless Screwdriver; Battery Charging - Bosch Professional GSR 140-LI Manual Del Usuario

OBJ_BUCH-3014-002.book Page 8 Friday, September 16, 2016 11:18 AM
8 | English

Technical Data

Cordless Screwdriver

Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Impact rate
Max. torque for soft screwdriving
application according to
ISO 5393
Maximum torque, hard screw-
driving application according to
ISO 5393
Maximum drilling diameter
(1st/2nd gear)
– Wood
– Steel
– Brickwork
Tool holder
Max. screw dia.
Weight according to EPTA-
Procedure 01:2014
Permitted ambient temperature
– during charging
– during operation **
and
during storage
Recommended batteries
Recommended chargers
Recommended chargers for
wireless charging batteries
*depending on the battery pack being used
** limited performance at temperatures <0 °C
Assembly

Battery Charging

Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium-ion battery is protected against deep discharging
by the "Electronic Cell Protection (ECP)". When the battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
 Do not continue to press the On/Off switch after the
machine has been automatically switched off. The bat-
tery can be damaged.
1 609 92A 34N | (16.9.16)
GSR 140-LI
3 601 JF8 0.. 3 601 JF8 1..
V= 14.4
-1
min 0 – 450
-1
min 0 – 1700
-1
min –
*
Nm 18
*
Nm 50
mm 32
mm 10
mm –
1.5 – 13
mm 8
kg 1.3/1.5*
°C –15 ... +50
°C –20 ... +50
GBA 14,4V..
GBA 18V... W
AL 1814 CV
Removing the battery
The battery 7 is equipped with two locking levels that should
prevent the battery from falling out when pushing the battery
unlocking button 8 unintentionally. As long as the battery is
inserted in the power tool, it is held in position by means of a
spring.
To remove the battery 7, press the unlocking button 8 and
pull out the battery toward the front. Do not exert any force.
GSR 180-LI GSB 140-LI
3 601 JF8 2..
18 14.4
0 – 450 0 – 450
0 – 1700 0 – 1700
– 0 – 27 000
* *
21 18
* *
54 50
35 32
10 10
– 8
1.5 – 13 1.5 – 13
10 8
1.3/1.6* 1.3/1.6*
–15 ... +50 –15 ... +50
–20 ... +50 –20 ... +50
GBA 18V.. GBA 14,4V..
AL 1814 CV AL 1814 CV
GAL 18... W
GSB 180-LI
3 601 JF8 3..
18
0 – 450
0 – 1700
0 – 27 000
*
21
*
54
35
10
10
1.5 – 13
10
1.3/1.6*
–15 ... +50
–20 ... +50
GBA 18V..
GBA 18V... W
AL 1814 CV
GAL 18... W
Bosch Power Tools