Access Codes; Phone Lock - Nokia 2116i Manual Del Usuario

Access codes

Note: Avoid using codes similar to emergency numbers such as 911 to
prevent accidental dialing of the emergency number.
The security and lock codes control access to features and are supplied with the
device. The preset security code is 12345. When you change the security code,
keep the new code secret and in a safe place separate from your device.
The preset lock code is 1234. If you enter an incorrect lock code five times in a
row, your device prompts you for the security code.
If you enter the wrong security code five times in succession, you will not be able to
enter a code for 5 minutes, even if you power off the device between incorrect entries.

Phone lock

The phone lock feature protects your device from unauthorized outgoing calls or
unauthorized access to information stored in the device. When phone lock is
activated, Phone locked
When the device is locked, calls still may be possible to the official emergency
number programmed into your device.
1. In the standby mode, select
codes > Phone lock.
2. Enter the lock code, and select OK.
3. Select one of the following options:
On turns the phone lock feature on immediately after the device is turned off
and then on.
Off immediately turns off the phone lock feature.
Call not allowed is displayed if you attempt to place a call while the device is locked.
To answer a call with phone lock on, select Answer, or press the call key.
Allowed phone number when phone locked
When phone lock is on, the only outgoing calls that can be made are to the
emergency number programmed into your device (for example, 911 or other
official emergency number) or the number stored in the
phone locked location.
1. In the standby mode, select
codes > Allowed number when phone
2. Enter the lock code, and select OK.
3. Enter the phone number; or select Find, recall the number from the phone
book, and select OK.
is displayed each time you turn your device on.
Menu > Settings
Menu > Settings
locked.
> Security settings >
Allowed number when
> Security settings >
S e t t i n g s
Access
Access
55