Control Lockout - GE JKP30 Manual De Uso

Special features of your oven control.
+
or
+
or
(depending on model)
20
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time
or temperature, you may notice the display
changes slowly. This special feature allows
you to change the speed. To set the speed you
prefer, follow the steps below.
Press the Bake and Broil Hi/Lo pads (on
double oven models, use the upper oven
controls) at the same time for 3 seconds,
until the display shows SF .
Press any + pad . The display will show
you a set speed between 1 and 5 .
Auto Recipe Conversion
™
When using convection bake, the Auto Recipe
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
This feature is activated so the display will show
the actual converted (reduced) temperature.
For example, if you enter a regular recipe
temperature of 350°F and press the Start pad,
the display will show CON and the converted
temperature of 325°F.
NOTE: This feature does not convert convection
bake cooking times, only regular baking
temperatures.

Control Lockout

Your control will allow you to lock out the press
pads so they cannot be activated when pressed.
NOTE: On double ovens with press pad controls
for both ovens, this activates this feature for
both ovens.
To lock/unlock the controls:
Press the Hour and Min – pads or the 9
and 0 pads (depending on model) at the
same time for 3 seconds until the display
shows LOC ON .
To unlock the control, press the Hour and
Min – pads or the 9 and 0 pads
(depending on model) at the same time
for 3 seconds until the display shows LOC
OFF.
(on some models)
Press any + pad to increase the speed up
to the number 5 .
Press any – pad to decrease the speed
down to the number 1 .
Press Start to activate the setting and
leave the control set in this special
features mode .
(on some models)
To deactivate the feature:
™
Press the Bake and Broil Hi/Lo pads
(on double oven models, use the upper
oven controls) at the same time for 3
seconds, until the display shows SF .
Press the Convection Bake pad . The
display will show CON ON. Press the
Convection Bake pad again . The display
will show CON OFF.
Press the Start pad .
To reactivate the feature, repeat steps 1–3
above but press the Start pad when CON ON
is in the display .
When this feature is on and the press pads are
pressed, the control will beep and the display
will show LOC ON .
The control lockout mode affects all press
■
pads. No press pads will work when this
feature is activated.
On models with oven knob(s), this feature is
■
not available for the lower oven.
This adjustment will be retained in memory
■
after a power failure.