GE JKP30 Manual De Uso página 21

Using the Sabbath Feature.
(Designed for use on the Jewish Sabbath and Holidays.) (on some models)
The Sabbath feature can be used for baking/roasting only. It cannot be used for broiling, self-cleaning
or Delay Start cooking.
NOTE: The oven light comes on automatically (on some models) when the door is opened and goes off when the door is
closed. The bulb may be removed. See the Oven Light Replacement section. On models with a light switch on the control
panel, the oven light may be turned on and left on.
+
or
(depending on model)
⊃
When the display shows the
oven is set in Sabbath . When the
⊃⊂
display shows the oven is
baking/roasting .
How to Set Sabbath Feature for Regular Baking/Roasting
NOTE: To understand how the oven control
works, practice using regular baking (non-
Sabbath) before entering Sabbath mode.
Make sure the clock shows the correct time of
day.
Press and hold both the Bake and Broil
Hi/Lo pads, at the same time, until the
display shows SF .
NOTE: If bake or broil appears in the
display, the Bake and Broil Hi/Lo pads
were not pressed at the same time . Press
the Clear/Off pad and begin again .
Tap the Delay Start pad until SAb bAtH
appears in the display .
Press the Start pad and ⊃ will appear in
the display .
Press the Bake pad . No signal will be
given .
On models with number pads, press them
in order to set the desired temperature .
On models with Temp + and – pads,
the preset starting temperature will
automatically be set to 350° . Tap the
Temp + or – pads to increase or decrease
the temperature in 5° increments . (The
Temp + or – pad should be tapped for
each temperature change; pressing and
holding these pads will not allow accurate
temperature setting . ) The temperature
can be set between 170° and 550° .
No signal or temperature will be given .
Press the Start pad .
After a random delay period of
approximately 30 seconds to 1 minute,
⊃⊂ will appear in the display indicating
that the oven is baking/roasting . If ⊃⊂
does not appear in the display, start again
at step 4 .
To adjust the oven temperature, press the
Bake pad and enter the new temperature
using the number pads (on some models) or
tap the Temp + or – pads (on some models)
to increase or decrease the temperature in 5°
increments . (The Temp + or – pad should be
tapped for each temperature change; pressing
and holding these pads will not allow accurate
temperature setting . )
Press the Start pad .
NOTE: The Clear/Off and Cooking Time pads
are active during the Sabbath feature .
GEAppliances.com
21