Care Of The Product; Care Of The Lithium­iOn Batteries; Transport And Storage Of Batteries - Hilti TE 30-A36 Manual De Uso

Drilling without hammering
Hammer drilling
Chiseling
Chisel positioning
CAUTION
Risk of injury! Loss of control over the chisel direction.
▶ Do not operate the tool when the selector switch is set to "Chisel positioning". Turn the
function selector switch until it engages in the "Chiseling" position.
Note
The chisel can be adjusted to 12 different positions (in 30° increments). This ensures that
flat chisels and shaped chisels can always be set to the optimum working position.
6 Care, maintenance, transport and storage

6.1 Care of the product

WARNING
Danger of electric shock! Improper repairs to electrical components may lead to serious injuries
including burns.
▶ Repairs to the electrical section of the tool or appliance may be carried out only by trained electrical
specialists.
▶ Keep the product, especially its grip surfaces, clean and free from oil and grease. Do not use
cleaning agents containing silicone.
▶ Never operate the product when the air vents are blocked. Clean the air vents carefully using a dry brush.
Do not allow foreign objects to enter the interior of the product.
▶ Clean the outside of the electric tool at regular intervals with a slightly damp cloth. Do not use a spray,
steam pressure cleaning equipment or running water for cleaning.
6.2 Care of the lithium­ion batteries
Note
Battery discharge is stopped automatically before the battery cells suffer damage.
A conditioning charge of the battery is not necessary.
Interruption of the charging operation has no negative effect on battery life.
Charging can be started at any time with no negative effect on battery life.
If the battery no longer reaches full charge, it may have lost capacity due to aging or overstressing. It
is possible to continue working with a battery in this condition but it should be replaced in good time.
▶ Charge batteries fully before using them for the first time.
▶ Do not allow moisture to enter the interior.

6.3 Transport and storage of batteries

WARNING
Risk of fire! Risk of short circuiting.
▶ To avoid short circuits and associated heat generation, lithium-ion batteries should never be stored
or transported in loose, bulk form and without protective measures.
▶ Pull the battery out of its locked position and into the first engagement position.
10
10
10
10
7