Helios Gamma Manual Del Usuario página 24

AUTOPRINT :
When ON, results are printed automatically after each run.
Before attempting to print at any point during operation of the instrument ensure
that the printer is ready to print, ie switched on, on line and supplied with paper.
Failure to do so will result in an error condition. Press CLEAR to clear the error
message ( the system may take a little time to respond ). Ensure the printer is
ready and retry.
CELL PROG
REF MODE
RATIO Method Page Function Keys
* RATIO *
Pressing RUN starts a ratio measurement using the current method and
switches to the RATIO RESULTS page.
Pressing ZERO starts a zero using the current method.
Any changes to the WAVELENGTHS or INTEGRATION parameters will invalidate the
current results.
If AUTOPRINTING is selected, a change to the MODE parameter will invalidate the
current results.
GD Issue 1 (08/2000)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
RATIO
Toggles between ON and OFF.
: Switches to the CELL PROG. screen (if fitted).
: Toggles the status of the Cell Programmer reference
mode (if fitted).
VIEW RESULTS - Switches to the RATIO RESULTS
page.
SAVE METHOD - Brings up the SAVE page from where
the method can be saved to the Methods Library.
MENU – Switches to the MENU page.
English 19