Press the on/off button 3. The on/off button
3
flashes slowly while the water heats up. The
machine is ready for descaling when the on/
off button lights up continuously.
Place the 1-cup pod holder q with a used
4
coffee pod in it in the coffee machine. Close
the lid and make sure it is properly locked.
Note:
D
Always put a used coffee pod in the pod holder
when you descale the machine. This pod serves
as a 'filter' to prevent the sieve or hole in the pod
holder from getting clogged with scale residue.
Warning:
B
Make sure the lid is closed properly and the
lid lever is locked before you start descaling
the machine.
Remove the drip tray.
5
16
Put a bowl with a capacity of at least 1.5
6
litres under the spout to collect the descaling
mixture.
When the on/off button lights up continuously,
7
press the 1-cup button q and the 2-cup
button qq at the same time for 3 seconds
until you hear a beep. Release the buttons
as soon as their lights as well as the selected
strength go out. This means that the descaling
procedure has been activated correctly.
•
The CALC light and the on/off button start
flashing to indicate that the descaling cycle
is in progress.
•
During the descaling cycle, the water comes
out of the machine in intervals.
•
When all the water in the water reservoir
has been used up, the descaling cycle is
finished. The on/off button starts to flash
rapidly.
Note:
D
If you press the 1-cup and 2-cup button
longer than 3 seconds, the machine does not
start the descaling cycle. If this happens, press
the 1-cup button and the 2-cup button at the
same time for 3 seconds again.