Connect; Placement; Pair Up With The Subwoofer - Philips Fidelio B1 Manual Del Usuario

3 Connect

This section helps you connect this product to a
TV and other devices.
For information about the basic connections of
this product and accessories, see the quick start
guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.

Placement

See the quick start guide on how to place the
subwoofer vertically or horizontally.
Note
•
If you place the subwoofer vertically, install the supplied
foot stand to prevent instability of the subwoofer.
•
If you place the subwoofer horizontally, attach the
four supplied rubber feet on the underside of the
subwoofer to avoid subwoofer vibration.
•
Ensure at least 10 cm (4 inches) clearance around the
ventilation vents of the subwoofer to achieve adequate
ventilation.
Place the subwoofer at least 1 meter (3 feet)
away from the main unit, and 10 centimeters
(4 inches) away from the wall.
For best results, place your subwoofer as shown
below.

Pair up with the subwoofer

The wireless subwoofer automatically pairs
up with the main unit for wireless connection
when you turn on the main unit and the
subwoofer.
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1
Turn on the main unit and the subwoofer.
» If the connection to the main unit is
lost, the indicator on the subwoofer
blinks white slowly.
2
Press the PAIRING (pairing) button on the
subwoofer to enter the pairing mode.
» The indicator on the subwoofer blinks
white quickly.
3
In HDMI ARC mode (press HDMI ARC),
on the remote control, within six seconds,
press twice then Volume + once, and
then hold down BASS +.
» If the pairing succeeds, the indicator on
the subwoofer lights up white.
» If the pairing fails, the indicator on the
subwoofer blinks white slowly.
4
If the pairing fails, repeat the steps above.
EN
7