Safety; Intended Use - WIKA A5301 Manual De Instrucciones

2. Safety

2. Safety
GB

2.1 Intended use

These bimetal thermometers are mainly used in the process industry
for monitoring the process temperature.
The bimetal thermometer has been designed and built solely for the
intended use described here, and may only be used accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the bimetal
thermometer outside of its technical specifications requires the
instrument to be taken out of service immediately and inspected by
an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
6
WARNING!
Before installation, commissioning and operation, ensure
that the appropriate bimetal thermometer has been
selected in terms of measuring range, design and specific
measuring conditions. The compatibility of the wetted
parts of the process connection (thermowell, thermowell
stem) with the medium must be tested.
Non-observance can result in serious injury and/or
damage to equipment.
Further important safety instructions can be found in the
individual chapters of these operating instructions.
WIKA operating instructions models 53, 54, 55