Still - FUNAI F42PDME Manual Del Usuario

STILL . ...
Tofreeze theimage onthescreen.
1
Press the STILL button.
The still mode turns on and the image dis-
played on the screen is frozen.
NOTE:
• When the still mode is on, the message "Still"
slowly flashes on the screen.
• When the still mode is on, the audio is muted.
• You cannot turn the still mode on when there is no
video signal or when switching between video sig-
nals.
2
Press the STILL button again to turn the still
mode off.
NOTE:
• Youcan also press the INPUT SELECT,
DISPLAY, SLEEP, VOL A(up) iT(down), MUTE,
SCREEN MODE or MENU buttons to turn the stiff
mode off.
Selecting sleep timer.
1
Press the SLEEP button.
The sleep timer is displayed on the screen.
NOTE:
• If the sleep timer is activated, the remaining time
is displayed on the screen.
If net activated, "0 minutes" is displayed.
2
Press the SLEEP button to set the time.
The SLEEP button switches between the
times.
_[ 0 minutes ]-_1 10 minutes I....... _'-[ 90 minutes
The timer starts counting down after the mes-
sage displaying the set time disappears (after
approximately 4 seconds).
NOTE:
• The remaining time displayed for the sleep timer
changes in steps of 1 minute.
• Tochange the set time, repeat the above proce-
dure.