OPERATING THE PLASMA DISPLAY
MENU
PREVIOUS
Automatically
Adjusting
the Picture
Settings
1 Select "Picture mode" on the PICTURE
SELECT screen with the • / • buttons.
2
Select the automatic adjustment
mode accord-
ing to the type of picture displayed on the
screen with the _1 / I_ buttons.
Manually Adjusting
the Picture
Settings
1
Select "Picture mode" on the PICTURE
SELECT screen with the • / • buttons.
2
Select "Manual" with the _1 / I_ buttons.
The display enters the manual mode and you
can specify individual adjustments.
3
Select the mode to adjust with the • / • but-
tons.
The modes rotate in the following order:
"Picture mode" - "Brightness"
- "Contrast" - ..
_.-"Reset"-
"Picture mode"
Adjust
the selected
mode
using the _1 / I_ but-
tons.
NOTE:
• If you have selected Brightness,
Contrast, Color,
Tint or Sharpness,
the menu display disappears,
and a bar for adjusting
the selected mode
appears in the center of the bottom of the screen.
• You can select "Color temp." from among three
modes: "Normal",
"Warm" and "Cool".
• If you select "Reset" and press the I_ button, the
adjusted
values return to their initial settings.
5 To adjust a different mode, repeat steps 3 and 4.
6 Press the PREVIOUS
button to return to the
Picture mode.
NOTE:
• Pressing the MENU button cancels the menu.
NOTE:
• There are 3 modes for automatically
adjusting
the
picture settings;
"News", "Movie" and "Dynamic".
3 Press the PREVIOUS
button to return to the
MAIN MENU.
NOTE:
• Pressing the MENU button cancels the menu.
Initializing the Adjustments
1
Select "Reset" on the PICTURE SELECT
screen with the • / • buttons.
2
Press the I_ button.
The settings you specified
individually are ini-
tialized.
NOTE:
• The initialized setting of "Manual" are as follows:
BRIGHTNESS:
50/100
CONTRAST:
70/100
COLOR:
50/100
TINT:
50/100
SHARPNESS:
1/2
COLOR TEMR:
Normal