Equipment Setup & Usage Instructions; Unpacking - Watts TRITON Manual De Instrucciones

Equipment Setup & Usage Instructions

Unpacking

STEP 1
Carefully unpack the TRITON Control Unit,
Fuser Cord, and Power Cord . Unravel the
Power and Fuser Cords .
NOTE: Fusers for use with TRITON
are sold separately; select the proper
size(s) for the job you are performing.
STEP 2
Carefully unpack the Fuser(s) you have
selected for your job .
STEP 3
Check the Control Unit, Fuser Cord, Power
Cord, and Fuser for damage of any kind .
!
Do not use this equipment
if it is damaged in any way.
Repackage the system or
individual components and
return to purchase place for
repair or replacement.
Do not substitute cords from
!
other manufacturers. Only
use TRITON Power Cords
and Fuser Cords with the
system. Substituting alterna-
tive equipment may cause
personal injury or damage to
the equipment, or void the
product warranty.
STEP 4
Test the GFCI plug on the Power Cord
following the instructions on the Cord .
DANGER
!
10
! If the Power Cord and/or
Fuser Cord are frayed or
damaged in any way, dis-
card immediately. Replace
with Watts authorized parts
before operation.
!
Do not use this equipment
if it any parts are missing.
Repackage system and
return to the place of pur-
chase for repair or replace-
ment.