CHI S09 Manual De Uso página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and Cleaning
w WARNING
cleaning. Do not immerse cord, plug, or base in any liquid.
1. Unplug. Allow Steamer to cool completely.
2. Open door of Water Reservoir and hold over a sink to
drain all water from Water Reservoir. Close door and
store in Travel Bag.
To Remove Minerals and Sediment from Steamer
(recommend every month)
1. Add 3 tablespoons (30 ml) white vinegar to Water
Reservoir and follow steps 1–5 in "How to Steam"
section. Add 2 tablespoons (30 ml) cold water to Water
Reservoir. Repeat steps to remove any remaining
vinegar in Steamer.
NOTE: Do not steam clothes with vinegar in Water
Reservoir.
Troubleshooting
Steamer is not steaming.
• No water in Water Reservoir. Add cold water and follow
"How to Steam" instructions.
• Steamer is not plugged into an outlet. Plug into outlet.
Water is leaking.
• Unplug. Check that Water Reservoir Door is secured in place.
Dry off Steamer. If leak continues, do not operate Steamer.
Contact CHI Garment Care.
Steamer is trailing or spitting.
• Clean Steamer by following the "To Remove Minerals and
Sediment from Steamer" section.
• ALWAYS empty Water Reservoir after each use. Water left in
Reservoir may discolor clothing or cause mineral/sediment
buildup in Steamer.
8
Electrical Shock Hazard. Disconnect power before

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

11580

Tabla de contenido