Tools; Information; Quick Setup - FTE univers U4128 Manual De Usuario

OSD 75
OSD 76
OSD 77
OSD 78

TOOLS

Press [Menu] in the TV mode to enter the main menu (OSD
75).
1. Press [ ] to select the Tools item.
2. Press [OK] to enter the selected item.
In the Tools menu (OSD 76):
3. Press [ ] to select the wanted menu item.
4. Press [OK] to enter the selected item among.

- Information

- Quick Setup

- Factory Default
- Software Upgrade
6.1. INFORMATION
1. When you select the "Information" menu you will see a
screen like beside (OSD 77). The screen displays data about
the current channel. This function is the same as the function
[Info] in the full screen TV mode.
2. Press [Exit] button to leave the information display.
6.2. QUICK SETUP
The receiver includes an installation assistant that will help you
to setup the different parameters as you can see at OSD 78.
1. Language: press [
appear on the menus (see point 5.1.)
2. First Audio: Some channels offer more than one audio
language. This function allows you to set the preferred audio
language for those channels using[
3. Second Audio: Some channels offer more than one audio
language. This function allows you to set the second audio
language for those channels using[
4. LNB Power: If your receiver is connected to the LNB directly
then you need to set the LNB Power to "On". If your receiver is
connected to a multi switch (SMATV signal distribution system)
then it may be that you don't need to provide the power to the
LNB. (See point 5.6.)
5. Single Search: Selecting this option and pressing [OK], you
will access to the Antenna Setup menu (see point 4.1.).
6. Multi search: Selecting this option and pressing [OK], you
will access to "Multi search" menu (see point 4.3.).
PAG. 34
6. TOOLS
] to select the language that will
]. (See point 5.1.)
]. (See point 5.1.)