Applications - Powerspot Mini Thermix Instrucciones De Uso

APPLICATIONS

A. Mobile phones, tablets and rechar-
geable batteries:
phones, rechargeable
other devices with the USB (Universal
Serial Bus) connector should be carried
out using the
supplied with the Mini Thermix.
If too many pieces of equipment are
connected simultaneously
Thermix may heat up above 90° C
(approx. 195° F). If this occurs the self-
protection mechanism will divert all
power to feed the fan so as to lower the
temperature below 75° C (about 170° F)
at which point it will return to normal
operation. This prevents damage to the
generator and any of its components (at
the cost of extending the recharging
time).
Avoid using the Mini Thermix over an
excessively intense fire and try to keep
the Mini Thermix voltmeter close to 10
volts before connecting any external
device.
The loading rate of mobile phones
ranges between 0.5% and 0.7% per mi-
26
The charging
batteries and
12V-USB converter
the Mini
nute, slightly higher than that obtained in
of
a house plug, depending on the state of
the phone battery. The same applies to
mini tablets and rechargeable batteries. Its
use is not recommended for loading
large tablets because of the high loading
times.
B. Lighting: Plug in the small bulb
supplied in the kit directly into the
connector located on the frame of the
device to instantly obtain a useful high-
intensity light. One may decrease its
brightness at will by simply lowering the
flame.
The LED
Powerspot – as the one provided in this
kit – begin to light up at 7 or 8 volts. If
only one (or two) of them are used, each
one will
intensity as an 80W incandescent bulb.
Once connected, the overall voltage will
decrease as more bulbs are added. The
bulbs supplied by Powerspot in this kit
will light up with the voltmeter between
5V and 30V, although optimal perfor-
mance is between 8.5V and 10V.
'AIR' bulbs designed
illuminate with
by
the same