Powerspot Mini Thermix Instrucciones De Uso página 27

You may connect up to 20 of them in
parallel, at any distance (no more than
one hundred meters or yards in total),
but the higher the number of bulbs the
less the intensity of each one. In this way
it is possible to simultaneously illuminate
different rooms in a building or different
parts of a campsite or settlement, with a
minimum of fuel consumption.
It is not possible to charge and illuminate
simultaneously.
C. Heating: The Mini Thermix always
emits a stream of air when placed over a
hot surface as the fan starts, but if bulbs
or other devices are connected the hot
air flow and pressure will be low and will
not be sufficient to heat a small room
beyond 5° C (9 degrees F) above
ambient temperature. However, if you
wish to warm up a space, the Mini
Thermix should be placed over a
controlled fire (never over an open or
campfire) monitoring that the voltage is
more than 12V and less than 15V.
In this way both the hot cooling air from
the device and the hot air from the burner
flame itself will be ejected by the air
stream. When placed over a normal
burner around 500 to 1000 watts of heat
energy is obtained. If placed over the
surface of a stove one should make sure
that the fan begins to turn. In this case the
speed will be lower but it will still spread
hot air into the surrounding space. This
device is ideal for use in small spaces
such as a tent or a shelter but if its
primary utility is to heat we suggest the
use of the Mini Thermix, much more
powerful both electrically and in terms of
heating power.
27