Artromot®-K1 Classic Description; Description Of The Device Components - DJO ARTROMOT K1 Classic Modo De Empleo

2. ARTROMOT®-K1 classic description
The motorized CPM device permits
extension and flexion of the knee joint
in the range of -10°/0°/120°,
and of the hip joint in the range of
0°/7°/115°.
It can be used on either side and
requires no configuration change.
These are some of the outstanding
ARTROMOT®-K1 classic features:
- anatomically correct setup
- physiological movements
- programming unit for precise
adjustment of patient-specific
therapy parameters
- symbols for easy operation of the
programming unit
Biocompatibility
The parts of the
ARTROMOT®-K1 classic device that
come in contact with the patient during
the intended use, are designed to fulfill
the biocompatibility requirements of the
applicable standards.
2.1 Description of
the device
components
Note: Please fold out page 3!
1. Thigh support assembly
2. Clamping lever to adjust the height
of the thigh support assembly
3. Thigh length scale
(femur length scale)
4. Thigh length fixation screws
(femur length)
5. Knee hinge
6. Calf support assembly
7. Clamping lever to adjust the height
of the calf support assembly
8. Calf length fixation screws
(tibia length)
9. Calf length scale (tibia length scale)
10. Strap to secure the foot to the
footplate
11. Footplate
12. Footplate angle fixation screw
13. Clamping lever to adjust footplate
rotation and level and to remove the
footplate
14. Connection for programming unit
15. Connection for power cord
16. Fuse cap
17. Power switch (ON/OFF)
18. Nameplate
19. Programming unit
20. Compartment for storage of
programming unit
30