Cleaning/Maintenance/Storage - HJM FES-45C Instrucciones De Uso

Ventilador Pie FES-45C_Maquetación 1 05/12/16 15:41 Página 14
1. Set the fan on a level dry surface.
2. Plug the power cord into a standard 220-240 volt AC 5OHz wall
outlet.
3. To operate your fan, turn the control knob to the desired fan speed
Low (l), Med (2) High (3)
4. Adjust the air stream by tilting the fan guard to the desired position.
5. To turn the apparatus off, rotate the control switch to

CLEANING/MAINTENANCE/STORAGE

• Turn the control to OFF and UNPLUG THE FAN BEFORE
CLEANING.
• Use only a soft damp cloth to clean the fan.
• DO NOT immerse the fan in water and never allow water to drip into
the motor housing.
• Do not use gasoline, paint thinner or other chemicals to clean the
fan.
• Store the fan in its original box or cover the fan to protect it from
dust.
• Store it in a cool dry place.
• The fan is equipped with a thermally protected, permanently lubri-
cated motor. Further lubrication is net required.
NOTE: If you experience a problem, please return the fan to the
place of the original purchase or see your warranty. Do not attempt
to open the motor housing yourself. Doing so may void your warranty
and cause damage to the fan or personal injury.
If the supply cord is damaged, it must be replaced by the manufac-
turer or its service agent or a similarly qualified person in order to
avoid a hazard.
- 14 -
E
N
G
L
I
S
H