MrCoffee BVMC-ECMP1000 Serie Manual Del Usuario página 7

a. b.
TURNING THE UNIT ON
a. Make sure unit is plugged in.
b. Turn unit on "I".
a.
The 3 control panel lights will start pulsing during heating until the brew and
steam heaters reach the perfect temperature. Once these lights become
solid, the unit is ready to use.
NOTE: It is normal for the Espresso function to be ready before the
Cappuccino and Latte functions.
NOTE: If you leave your unit on for 15 minutes without using, your unit will
go into sleep mode. Press any button to reactivate.
SELECT THE FUNCTION
PREPARING ESPRESSO
a. Press the Espresso Button "
b. Press the Espresso Button "
c. Press and hold the Espresso Button "
brewing to your preference. When done, press the Espresso Button "
once again to stop brewing. For safety, unit will automatically stop after
brewing 5 ounces.
a. b.
x1
The unit will start brewing the espresso according to your selection. The unit
will turn off automatically and the lights will become solid indicating that the
cycle has been completed. Your delicious espresso is ready to be enjoyed.
BVMC-ECMP1000_BVMC-ECMP1001_13ESM1.indd 13-14
c.
b.
" once to brew one single shot.
" twice to brew a double shot.
" for 3 seconds to customize the
c.
x2
hold for
3 sec.
12
NOTE: To brew less coffee than the preset serving, press the function button
to stop the brewing process when the amount of coffee desired is reached.
PREPARING CAPPUCCINO
Prior to preparing your cappuccino, adjust the amount of froth milk according
to your preference by turning the Froth Control Knob to the right for more
froth and to the left for less froth. For Cappuccino, it is recommended that the
Froth Control Knob be turned to the Cappuccino setting.
MORE FROTH
NOTE: The froth intensity can be adjusted during the brewing cycle.
a. Press the Cappuccino Button "
b. Press the Cappuccino Button "
a.
NOTE: For a small cup, use the single shot filter. For a large cup, use the
double shot filter.
IMPORTANT: Make sure to clean the Frothed Milk Dispensing Tube after use.
See Cleaning instructions on page 15 for instructions.
PREPARING LATTE
Prior to preparing your latte, adjust the amount of froth according to your
"
preference by turning the Froth Control Knob to the right for more froth and
to the left for less froth. For Latte, it is recommended that the Froth Control
Knob be turned to the Latte setting.
MORE FROTH
a. Press the Latte Button "
b. Press the Latte Button "
LESS FROTH
" once to brew a small cup of cappuccino.
" twice to brew a large cup of cappuccino.
b.
x1 x2
LESS FROTH
" once to brew a small cup of latte.
" twice to brew a large cup of latte.
13
9/30/13 2:33 PM