RS Welding Star F Serie Manual De Uso página 17

IMPORTANT INFORMATION
Read and understand all of the operating instructions, safety precautions
and warnings in the Instruction Manual before operating or maintaining
this compressor.
Most accidents that result from compressor operation and maintenance
are caused by the failure to observe basic safety rules or precautions.
An accident can often be avoided by recognizing a potentially
hazardous situation before it occurs, and by observing appropriate
safety procedures.
Basic safety precautions are outlined in the "SAFETY" section of this
Instruction Manual nad in the sections which contain the operation and
maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine
damage are identifi ed by WARNINGS on the compressor and in this
Instruction Manual.
Never use this compressor in a manner that has not been specifi cally
recommended by manufacturer, unless you fi rst confi rm that the planned
use will be safe for you and others.
MEANINGS OF SIGNAL WORDS
WARNING: indicates a potentially hazardous situations which, if ignored,
could result in serious personal injury.
CAUTION: indicates a hazardous situations which, if ignored, couls result
moderate personal injury, or could cause machine damage.
NOTE: emphasizes essential information
SAFETY
IMPORTANT SAFETY INSTRUCTIONS FOR USE
OF THE COMPRESSOR.
WARNING:
DEATH OR SERIOUS BODILY INJURY COULD RESULT FROM
IMPROPER OR UNSAFE USE OF COMPRESSOR. TO AVOID THESE
RISKS, FOLLOW THESE BASIC SAFETY INSTRUCTIONS.
READ ALL INSTRUCTIONS
1. NEVER TOUCH MOVING PARTS
Never place your hands, fi ngers or other body parts near the
compressor's moving parts.
2. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE
Never operate this compressor without all guards or safety features
in place and in proper working order. If maintenance or servicing
requires the removal of a guard or safety features, be sure to
replace the guards or safety feature before resuming operation of
the compressor.
3. ALWAYS WEAR EYE PROTECTION
Always wear safety goggles or equivalent eye protection. Compressed
air must never be aimed at anyone or any part of the body.
4. PROTECT YOURSELF AGAINST ELECTRIC SHOCK
Prevent body contact with grounded surfaces such as pipes,
radiators, ranges and refrigeration enclosures. Never operate the
compressor in damp or wet locations.
5. DISCONNECT THE COMPRESSOR
Always disconnect the compressor from the power source and
remove the compressed air from the air tank before servicing,
inspecting, maintaining, cleaning, replacing or checking any parts.
6. AVOID UNINTENTIONAL STARTING
Do not carry the compressor while it is connected to its power source
or when the air tank is fi lled with compressed air. Be sure the knob
of the pressure switch in the "OFF" position before connecting the
17
compressor to its power source.
7. STORE COMPRESSOR PROPERLY
When not in use, the compressor should be stored in dry place.
Keep out of reach of children. Lock-out the storage area.
8. KEEP WORK AREA CLEAN
Cluttered areas invite injurues. Clear all work areas of unnecessary
tools, debris, furniture etc...
9. KEEP CHILDREN AWAY
Do not let visitors contact compressor extension cord. Alla visitors
should be kept safely away from work area.
10. DRESS PROPERLY
Do not wear loose clothing or jewerly. They can be caught in moving
parts. Wear protective hair covering to contain long hair.
11. DON'T ABUSE CORD
Never yank it to disconnect from receptable. Keep cord from heat,
oil and sharp edges.
12. MAINTAIN COMPRESSOR WITH CARE
Follow instructions for lubricating. Inspect cords periodically and if
damaged, have repaired by authorized service facility.
Inspect extension cords periodically and replace if damaged.
13. OUTDOOR USE EXTENSION CORDS
When compressor in used outdoors, use only extension cords
intended for use outdoors and so marked.
14. STAY ALERT
Watch what you are doing. Use common sense. Do not operate
compressor when you are tired.
Compressor should never be used by you if you are under the infl uence
of alcohol, drugs or medication that makes you drowsy.
15. CHECK DAMAGED PARTS AND AIR LEAK
Before further use of the compressor, a guard or other part is
damaged should be carefully checked to determine that it will operate
properly and perform its intended function.
Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, air leak, and any other conditions that
may affect its operation.
A guard or other part that is damaged should be properly repaired or
replaced by an authorized service center unless otherwise indicated
elsewhere in this Instruction Manual. Have defective pressure
switches replaced by authorized service center.
Do not use compressor if switch does not turn it on and off.
16. HANDLE COMPRESSOR CORRECTLY
Operate the compressor according to the instructions provided
herein. Never allow the compressor to be operated by children,
individuals unfamiliar with its operation or unauthorized personnel.
17. KEEP ALL SCREWS, BOLTS AND COVERS TIGHTLY IN PLACE
Keep all screws, bolts, and plates tightly mounted.
Check their condtions periodically.
18. KEEP MOTOR AIR VENT CLEAN
The motor air vent must be kept clean so that air can freely fl ow at
all times. Check for dust build-up frequently.
19. OPERATE COMPRESSOR AT THE RATED VOLTAGE
Operate the compressor at voltages specifi ed on their nameplates.
If using the compressor at a higher voltage than the rated voltage, it
will result in abnormally fast motor revolution and mey damage the
unit and burn out the motor.
20. NEVER USE A COMPRESSOR WHICH IS DEFECTIVE OR
OPERATING ABNORMALLY
If the compressor appears to be operating unusually, making strange
noises, or otherwise appears defective, stop using it immediately and
arrange for repairs by a authorized service center.
21. DO NOT WIPE PLASTIC PARTS WITH SOLVENT
Solvents such as gasoline, thinner, benzine, carbon tetrachloride, and
alcohol may damage and crack plastic parts. Do not wipe them with
such solvents. Wipe plastic parts with a soft cloth lightly dampened
GB