Storage; Maintenance And Repair - Intex 57135 Manual Del Usuario

Storage

NOTICE!
Risk of damage!
Direct sunlight could damage the pool.
− Cover the pool, so that it cannot be filled with water (e.g.
rain water).
− Store the pool in a location that is protected against
exposure to the sun and is not subject to significant
fluctuations in temperature.
1. Empty the pool as described in the chapter "Emptying the pool."
2. Open the outer ring valve
other and let the air out by pressing the valves together with your thumb
and forefinger (see Fig. D).
3. Close the outer ring valve and all the air chamber valves.
4. Spread the pool out on a level, dry and clean surface.
5. Fold up the pool and store it in its box.

Maintenance and repair

NOTICE!
Risk of damage!
Before each use, check the pool for damage.
− Do not inflate the pool if it is damaged.
Regularly check the pool and all seams for leaks. You can repair small holes in
the pool with the enclosed self-adhesive repair patch
follows:
1. Inflate the air chamber that you would like to check for leaks.
2. Spray a soapy solution onto the seams or the area where you suspect a leak.
If bubbles form, there is a leak. If no bubbles form, the air chamber does not
have any leaks.
3. Completely let the air out of the air chamber.
10 and the air chamber valves
Storage
one after the
11
9 . To do so, proceed as
15