Technical Data; Disposal; Disposing Of The Packaging; Disposing Of The Pool - Intex 57135 Manual Del Usuario

Technical data

4. Clean the leaky area as described in the chapter "Cleaning."
5. Cut a suitably-sized piece of the repair patch.
6. The patch must overlap all sides of the area you intend to repair by 0.59"
(1.5 cm).
7. Round off the corners of the repair patch and apply it to the middle of the
damaged area.
8. Firmly press down the repair patch on all sides.
9. Leave the repaired air chamber to stand for at least 60 minutes.
10. Perform another leak test as described in step 2.
If the repair was not successful, dispose of the pool as described in the chapter

"Disposal."

Technical data
Model:
Water capacity of the main pool
(water level approx. 5.51" (14 cm)): 77 gal (290 l)
Max. weight load of the slide:
Max. weight load of the pool:
Weight (not inflated):
Dimensions:
Article number:
Disposal

Disposing of the packaging

− Sort the packaging before you dispose of it. Dispose of paperboard
and cardboard with the recycled paper service and wrappings with the
appropriate collection service.

Disposing of the pool

− Should the pool no longer be capable of being used at some point in time,
dispose of it in accordance with the regulations in force in your federal
state or country.
− Please ensure your recycling information applies to local regulations and
the EPA recommendations (www.epa.gov).
16
57135
110.2 lbs (50 kg)
178.6 lbs (81 kg)
15.1 lbs (6.83 kg)
approx. 10.93 × 7.51 × 3.67 ft
(3.33 × 2.29 × 1.12 m)
97765