Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Selection of installation equipment
Drill holes on the table surface according to the sizes shown in the drawing. For
the purpose of installation and use, a minimum of 5 cm space shall be left
around the hole.
Be sure the thickness of the table surface is at least 30mm. Please select
heat-resistant table material to avoid larger deformation caused by the heat
radiation from the hotplate.
As shown in Figure (1)
Under all circumstances, make sure the built-in electric cook top is well
ventilated and the air inlets and outlets are not blocked. Ensure the built-in
cook top is in good condition. See Figure (2)
mini 2 cm
Air intake
mini 760mm
mini 5 cm
Air exit
mini 5 mm
Figure (2)
2
Publicidad
Tabla de contenido
