Emptying The Tank; Optional Accessories - Makita DVC750L Manual De Instrucciones

MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
CAUTION:
To reduce the contact to the dust,
use goggles and dust mask when emptying the
tank or cleaning the filter.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

Emptying the tank

WARNING:
Always make sure that the
cleaner is switched off and the battery cartridge
is removed before emptying the tank. Failure to do
so may cause an electric shock and serious personal
injury.
CAUTION:
Do not apply a great impact on
the tank. A great impact may cause deformation and
damage to the parts.
CAUTION:
Empty the tank at least once a day
although this depends on picked-up dust volume
in the tank. Or, the suction force will weaken and the
motor may be broken.
CAUTION:
Do not grab the hook when empty-
ing the tank. Grabbing the hook may cause the hook
to break.
Unhook and lift up the tank cover.
Shake off the dust from the HEPA filter and then dis-
pose of the dust from the tank.
► Fig.16: 1. Hook 2. Tank
Cleaning of HEPA filter
NOTICE:
Do not rub or scratch the HEPA filter
with hard objects such as a brush and a paddle.
Clogged HEPA filter cause poor suction performance.
Clean out the filter from time to time.
1.
To remove the HEPA filter, unlock and remove the
tank cover.
2. Turn the HEPA filter counterclockwise and pull out
of the tank cover.
► Fig.17: 1. Tank cover 2. HEPA filter 3. Tank
3. To remove dust adhering to the HEPA filter, shake
the frame bottom quickly several times.
Occasionally wash the HEPA filter in water, rinse and
dry thoroughly in the shade before use. Never wash the
filter in a washing machine.
► Fig.18
4. To install the HEPA filter, place and twist it clock-
wise so that the securing lips are firmly locked in the
tank cover.
► Fig.19: 1. Tank cover 2. HEPA filter 3. Securing lip
4. Tank
5.
Mount the tank cover and lock it.
NOTE: The filter wear out in course of time. It is rec-
ommended to have some spares for them.
Installing prefilter set
Optional accessory
1. Unlock and remove the tank cover.
2. Set the damper on the HEPA filter and cover it
with the prefilter. Be sure to hook the rubber band of the
prefilter onto the lip of the HEPA filter.
► Fig.20: 1. HEPA filter 2. Damper 3. Prefilter
3. Mount the tank cover and lock it.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Hose
• Front cuff 24
• Joint 22-38
• Corner nozzle
• Round brush
• Shoulder strap
• Prefilter set
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
12 ENGLISH