Publicidad
Idiomas disponibles
Idiomas disponibles
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR SNOW THROWER. Compare the illustrations with your SNOW THROWER
to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Auger Drive
Electric
Start
Button
Primer
Ignition
Button
Key
Traction Drive Lever
Remote Chute
Control Lever
/
Switch
Crank Assembly
Box
Chute Deflector
Speed
Shifter
Lever
_o
Discharge
Chute
X
Shear Pin
Height
Adjust Skid
Figure 14
Chok{
Control
Recoil
Throttle
Starter
Control
Handle
Auger Drive Lever-
Starts and stops
the auger and impeller (snow gathering
and throwing)
Traction Drive Lever - Propels the
snow thrower forward and in reverse.
Speed Shifter Lever - Selects the
speed of the snow thrower (6 speeds for-
ward and 2 speeds reverse).
Crank Assembly
- Changes the direc-
tion of snow throwing through the dis-
charge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge Chute - Changes the height
and direction the snow is thrown.
Height Adjust Skid - Adjusts the ground
clearance of the auger housing.
Ignition Key - Must be inserted to start
the engine.
Recoil Starter Handle - Starts the en-
gine manually.
F-021050L
12
Choke Control - Used to start a cold
engine.
Primer Button
- Injects fuel directly into
the carburetor manifold for fast starts in
cold weather.
Remote Chute Control Lever - Push
forward to discharge snow high and far.
Pull remote lever back to discharge snow
down.
Throttle Control - Controls the engine
speed.
Electric Start Button - (if so equipped)
Used to start the engine using the 120V elec-
tric starter.
Shear Pin - Shear pins are designed to
break (to protect the machine) if an ob-
iect becomes lodged in the auger hous-
ing.
Toolbox
- spare shear pins and
spacers are located in toolbox.
Publicidad
