Home Screen - NEO NEXUS DUAL SPLIT RDM Manual De Usuario

7. SETTINGS AND MENU
General Navigation
The navigation buttons is the primary means for
navigating through the menus. Most of the menus
arrange items vertically. In those menus, Press the
down button to select the item below the currently
selected item or Press the up button to select the
item above the currently selected item. In menus
that arrange items horizontally (e.g. text fields), Press
the down button means "to the right" and counter
Press the up button means "to the left".
Other than that, the right button also functions as a
push button. This button is generally used to confirm
a selection or to navigate to a selected submenu.
This manual will also refer to pushing the right but-
ton as "push [OK]" or "push the [OK] button".
The left button (depicted on page 7), which is gener-
ally used to dismiss a selection or to exit a menu.
By keeping the left button pressed for at least two
seconds, you can always navigate to the Home
Screen. From the Home Screen, the menu is
launched by simply pushing the [OK] button.
Below, the following notation is used to describe lo-
cations in the menu: Home > Menu > Sub menu > ...
For example, the manual could say "navigate to
Home > Menu > Input A > Mode". This can be read as
follows:
Keep left button pressed for 2 seconds or pushing
the home button to reach the Home Screen.
Then, press MENU to get to the menu.
Select "Input A" using the up down key and press
P. 8
Neo Nexus Dual Split RDM - English version
enter again to confirm the selection.
Select "Mode" and confirm your selection once
again with the ENTER button.

Home Screen

Home Screen indicating that no signal is available on
either input port.
Home Screen indicating that a valid signal is applied
to each of the signal inputs.
Home Screen showing a valid signal on input A and a
disturbed signal on input B.