Electrical Connection - EAS ELECTRIC EMEI20L Manual De Instrucciones

Installation Instructions
Please Read the Manual Carefully Before
Installation
Please note

Electrical connection

The oven is fitted with a plug and must only be
connected to a properly installed earthed socket.
The socket must only be installed and the
connecting cable must only be replaced by a
qualified electrician, and in accordance with the
appropriate regulations. If the plug is no longer
accessible following installation, an all pole
isolating switch must be present on the installation
side with a contact gap of at least 3 mm.
The fitted cabinet must not have a back wall
behind the appliance. Minimum installation height:
85 cm. Do not cover ventilation slots and suction
holes.
Note: Do not trap or bend the power cable.
43 V.2